Industry News

  • How To Master The Weld Metal Build Up Technique

    How To Master The Weld Metal Build Up Technique

    Cladding is an essential part of welding. It refers to the process of depositing a special performance layer on the surface of parts welded with metal to achieve wear resistance, heat resistance and corrosion resistance. Weld metal build up is a cladding that welds metal to worn or damaged metal ...
    Read more
  • What To Look For In a Custom Straightening Machine

    What To Look For In a Custom Straightening Machine

    When choosing a custom straightening machine, there are several important factors to consider. The machine you choose can have a major impact on the efficiency and quality of your production process, so it’s important to choose wisely. One of the key factors to consider is the type of strai...
    Read more
  • The Role Of Hydraulic Alligator Shear

    The Role Of Hydraulic Alligator Shear

    Hydraulic alligator shear is a metallurgical term used to describe powerful cutting tools used in the metal recycling industry. This special tool is used to cut various shapes of steel and other metal structures in the cold state, so as to be used as qualified charge. Hydraulic crocodile shears a...
    Read more
  • How Does A Continuous Casting Machine Work

    How Does A Continuous Casting Machine Work

    Continuous casting is a revolutionary process used in the manufacturing industry to produce metal products such as copper, aluminum and steel of exceptional quality and consistency. The continuous casting machine (CCM) is a key piece of equipment in this process. It is an advanced automated indus...
    Read more
  • Chill Roll Design-Ensuring Manufacturing Quality

    Chill Roll Design-Ensuring Manufacturing Quality

    Chilled roll is complex components with a very hard surface layer and are subjected to high stress due to their use in various applications such as rolling mill equipment. Therefore, Chill Rolls require a high manufacturing quality, which is necessary to ensure their effectiveness in use. Guangxi...
    Read more
  • Steel Rolling Mill High-Speed Zone Equipment Maintenance Procedures

    Steel Rolling Mill High-Speed Zone Equipment Maintenance Procedures

    1.Check the rolling mill daily for any strange noise, spot check the coupling for any strange noise and heating phenomenon, whether the coupling bolt is loose. 2.Check whether there is a large amount of oil leakage signs at the seal of pre-finish rolling transmission box and connection flange, sl...
    Read more
  • Rolling Mill Equipment Maintenance Procedures

    Rolling Mill Equipment Maintenance Procedures

    Rolling Mill Equipment Maintenance 1. Implementation of lubrication “five” principle (fixed point, fixed person, time, fixed quality, quantitative), to ensure that the lubrication parts of the mill in a good state of lubrication. 2. Check the mill adjustment device (press down, press ...
    Read more
  • Heating Furnace Area Equipment Maintenance Procedures

    Heating Furnace Area Equipment Maintenance Procedures

    1.Keep the heating furnace body clean,found that there are debris or dirty things on the furnace (including the top of the furnace) should be cleaned up in time. 2.Operators should always check whether the furnace wall and roof are in good condition, if found that the expansion seam is too large,...
    Read more
  • Steel Rolling Mill Equipment Line Reducer Maintenance Procedures

    Steel Rolling Mill Equipment Line Reducer Maintenance Procedures

    Maintenance of steel rolling mill line reducer 1. Check the bolts of each department to ensure that the coupling is solid and reliable. 2. Often observe the work of the thin oil lubricating oil flow indicator, to ensure that the oil circuit is smooth, oil pressure, flow rate is sufficient, and th...
    Read more
  • Maintenance Procedures For Hot Feed Area Of Steel Rolling Mill

    Maintenance Procedures For Hot Feed Area Of Steel Rolling Mill

    1.The steel rolling mill needs to check the tightness of the hot feed rollers, inlet rollers base foot bolts, side guide plate fixing bolts and other connecting bolts every day, and if there is any loosening, it should be dealt with in time. 2.Check the lubrication condition of roller bearing sea...
    Read more
  • Types And Usage Methods Of Refractory Materials For Industrial Melting Furnaces

    Types And Usage Methods Of Refractory Materials For Industrial Melting Furnaces

    The main thermal equipment of the industrial melting furnace includes calcination and sintering furnace, electrolytic tank and smelting furnace. The lining of the firing zone of the rotary kiln is generally built with high-alumina bricks, and clay bricks can be used as the lining for other parts....
    Read more
  • H-Beam Production Process

    H-Beam Production Process

    Generally, small and medium-sized (H400×200 and below) H-beams mostly use square billets and rectangular billets, and larger-sized (H400×200 and above) H-beams mostly use special-shaped billets, and continuous casting billets can be used for both rectangular and special-shaped billets. After bein...
    Read more