Flying Shears For Bar Rolling
| Product Name | Flying Shears | Definition | Shear Running In The Lateral Shear Of The Rolled Parts |
| Brand | Runxiang | Requirements | Shear Edge Should Have The Best Shear Edge Clearance |
| Industry | Metallurgy Rolling Steel | Equipment Components | Flying Shear Body, Transmission Device, Etc. |
Horizontal shear running shear of rolling parts called flying shear, is a kind of processing equipment that can quickly cut off iron sheet, steel pipe, paper rolls, is the metallurgical rolling industry, high-speed wire rod and rebar cut-off machine, is a modern rolling bar shear in the product, with less power consumption, low investment costs.
Flying shears commonly used in rolling steel, paper and other production lines. In the continuous rolling billet shop or small section steel shop, it is placed in the back of the rolling line, the rolled parts will be cut into a fixed-foot or only cut the head and cut the tail. In the cold, hot steel shop cross-cutting units, heavy shear units, galvanizing units and tin-plating units are equipped with a variety of different types of flying shears, the strip is cut into a fixed length or cut into the specified weight of steel coils. The extensive use of flying shear is conducive to the rapid development of rolling steel production to high-speed, continuous direction. Therefore, it is an important part of the development of steel rolling production.
Work requirements:
Sizing flying shears should ensure good shear quality – accurate sizing, neat cutting surface and a wide range of sizing adjustment, but also a certain speed of shear. In order to meet the above requirements, the structure and performance of flying shears, in the shearing process must meet the following requirements:
1.The horizontal speed of the shear blade should be equal to or slightly greater than the speed of movement of the rolled parts.
2.Two shear blades should have the best shear edge clearance.
3.Shear process, the shear blade preferably for planar translational motion, that is, the shear blade perpendicular to the surface of the rolled parts.
4. Flying shear to work in accordance with a certain working system to ensure that the fixed length.
5. Flying shears of the acceleration and mass of the moving parts should strive to minimize inertia forces and dynamic loads.
